| Author | Message | ||
| T.E. Price (uposb4) Username: uposb4 Registered: 05-2006 |
Terrible way to treat am amp.  | ||
| Mike Kaus (mm210) Username: mm210 Registered: 05-2006 |
My gawd! I wouldn't do that to an Ampeg! | ||
| Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 |
what in the hell happened to that head? | ||
| Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 |
 This is what that head should look like . | ||
| Bill Traylor (bozzy369) Username: bozzy369 Registered: 02-2008 |
now that i can see barely see the lettering on the faceplate of the messed up one ,it might not be a sixty-five but you get the idea. | ||
| Steve Kennedy (admin) Username: admin Registered: 03-2002 |
Somebody did this on purpose. They "punked" it up. The front panel had to have been removed, roughed up, then re-installed (damage goes under the pot, switch and jack nuts as well as the pilot light). The grill board was mounted BACKWARDS without moving the badges (if it even still had them to begin with). This is a "Kurt Cobain" job. |
Tue, 03/25/2014 - 09:33
#1