1 post / 0 new

Correct wiring for on/off toggle switch - HD212 - One Fifty

Lately, my amp would not shut off using the on/off toggle switch on the back of the amp. I ordered a new switch -Carling SPST toggle, with two prongs. I removed the old switch before taking photos of the wire connections. I have one black lead and 2 white leads. Am I correct that the black lead goes to one terminal, and the 2 white leads go to the second terminal? Since the terminals are so close to each other, should I use female wire connectors to attach the leads, or solder the leads to the two terminals as was originally done? Thank in advance for any suggestions!