4 posts / 0 new
Last post

Music Man RH cabinet configurations


Tony Cooper
Posted on Friday, March 18, 2005 - 08:52 am:   

Why is it that whenenver I see 2 RH cabinets stacked on top of each other, the ports are always separated - as in the bottom cabinet has the port near the floor, and the top cabinet has the port near the amp? Does this help with the low frequency distribution?
Posted on Saturday, March 19, 2005 - 05:57 am:   

weird hey? all you do is flip the grill cloth around but wht diference is it making good question? or is it purely aesthetics, steve? michael?
michael kaus
Posted on Monday, March 21, 2005 - 04:41 am:   

Most people that I remember from back in the day didn't KNOW you could flip it so they just wanted the badges up! It really doesn't affect the tone in any way as bass will travel where it want to anyway(usually too loud, as is the case with most bass players-no offense meant). It just goes everywhere. Mike.
Tony Cooper
Posted on Monday, March 21, 2005 - 07:57 am:   

Mike - that's funny because I feel the same way about guitar players. But it's usually because they are treading on my frequencies and muddying-up the low-end. But that's a discussion for another topic. Thanks for the info. Does the grill cloth pop off pretty easily?
Posted on Monday, March 21, 2005 - 04:55 pm:   

yeah its just velcroed on the rh cabs
michael kaus
Posted on Tuesday, March 22, 2005 - 04:55 am:   

Hey, I AM a bass player! I do bass, keys and guitar in my band(multi-screwed up). It wasn't a slam, I know how I am when I play bass-I can never hear MMMMEEEEEEE!
Posted on Saturday, March 26, 2005 - 05:52 pm:   

...at least you didn't claim to be a drummer!


michael kaus
Posted on Sunday, March 27, 2005 - 03:59 pm:   

HEAVEN FORBID!!!!!!!!!!!!!!!

That would be insulting!

what should I set the impeadance switch to?

I have 4 ohm RH 2X12 One Thirty cabinet with origanal alnico speakers and a 1x15 cabinet with a 8 ohm Eminence Ledgend if I hook up both cabs would the 4 ohm seeting be right or is this even adviseable? Oh ya through a HD one thirty Reverb head.

mm210's picture


If you use the 130 and the normal configuration of the head has NOT been changed, your best bet is the 8 ohm setting. The MM's are wired in SERIES on the external speaker jack so the closest will be the 8 ohm tap since you will have a 12 ohm load. Mike.



thanks man that puts my mind at ease.

Log in or register to post comments