| Author | Message | ||
| Jonathan Moore (jondanger) Username: jondanger Registered: 08-2010 |
If the speaker outputs in my 210 Sixty-Five don't specify that they are wired in series or parallel, should I assume that they are series? The impedance switch has an 8 ohm and a 4 ohm setting. The two 8 ohm speakers are connected in parallel, making a 4 ohm load without an extension cab. I built a cab to sit under the combo, and it sounds right with the switch set to 8. Just looking for confirmation. This is the model with the phase inverter. Thanks! | ||
| Mike Kaus (mm210) Username: mm210 Registered: 05-2006 |
My 2-10 65 with inverter IS marked and it IS is series. |
Tue, 03/25/2014 - 09:33
#1