Jim Wainwright (av8or3)
What are the recommended impedence settings for
the stock speakers in the following combo's ?
I have always thought that the 8 ohm selection was correct, but have gotten confused reading some of the posts in this section.
Appreciate the advice, thanks Jim
|Cameron Kinsey (gibson175)|
apparently the 210 sixty-five should run at 4 ohms. The 8 ohm setting is if you run another 4 ohm extension cabinet as the speaker outputs are wired in series. (or so my speaker repair guy said)hope this helps!
Tue, 03/25/2014 - 09:31#1