| Author | Message | ||
| Nate (auerilas) Username: auerilas Registered: 03-2007 |
I'm looking to add a reverb tank to my HD-130 Reverb, which came second-hand without it, but I can't seem to find the right one. Does the Accutronics website list the correct tank for it? Any help on this would be appreciated | ||
| T.E. Price (uposb4) Username: uposb4 Registered: 05-2006 |
Try This site. http://www.tubesandmore.com/ | ||
| Mike Kaus (mm210) Username: mm210 Registered: 05-2006 |
The one in my 130 HEAD was a 4FB3A1B. | ||
| Nate (auerilas) Username: auerilas Registered: 03-2007 |
Thanks. Based on the part number i found the right one on the tubesandmore site. Wasn't sure of the impedances. Thanks again. | ||
| Mark P. (mark_p) Username: mark_p Registered: 10-2008 |
I've seen the 4FB3D1B cited as used by MM -- it has the same specs as the 4FB3A1B except the "A" has grounded inputs/outputs, while the "D" has insulated inputs/outputs. I suspect the "D" is the safer bet, since it prbably easier to convert insulated inputs/outputs to grounded if necessary, rather than vice versa. |
Tue, 03/25/2014 - 09:30
#1