| Author | Message | ||
     spudmurphy (spudmurphy) Username: spudmurphy Registered: 06-2007 |
 Well, I'll try and post some photos here - let's hope it works! | ||
| spudmurphy (spudmurphy) Username: spudmurphy Registered: 06-2007 |
Yipppeee worked fine. The picture above is taken of the RD 50 after I had refurbed it. The cabinet below it, is one I made from another old cabinet lets put some more pics up Here's the tired looking RD50 and the cab I cut down  | ||
| spudmurphy (spudmurphy) Username: spudmurphy Registered: 06-2007 |
The rear panel had been drilled to accept XLR sockets I had to fill the holes in, so an old pool cue came in handy  | ||
| spudmurphy (spudmurphy) Username: spudmurphy Registered: 06-2007 |
The rear panel had been drilled to accept XLR sockets I had to fill the holes in, so an old pool cue came in handy    Here's The internals  | ||
| Mike Kaus (mm210) Username: mm210 Registered: 05-2006 |
Looks very nice done. You definitely turn it into a great looking combination. What's in the lower one--12"? | ||
| spudmurphy (spudmurphy) Username: spudmurphy Registered: 06-2007 |
Yeah - it's a 12 inch old Randall speaker that was lying around my mates workshop - sounds identical to the speaker in the amp.(Which may be considered by some to be a bad thing?) I have a really old 10 (ten) ohm 12 inch 30 watt Selmer speaker knocking about - may try that one day |