12AX7 tube for 122RD50 overdrive channel Log Out | Topics | Search
Moderators | Edit Profile

Music Man Amps Discussion Forum » Tubes & Substitutions » 12AX7 tube for 122RD50 overdrive channel « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dirk Wacker (doc_holiday)
Username: doc_holiday

Registered: 02-2007
Posted on Sunday, August 12, 2007 - 04:55 am:   

With the 6l6GC-STR from TAD I found a very good sounding power-tube and I really like the sound they make. But with the Ruby Tubes 12AX7-C in the overdrive channel Iīm not so satisfied. The gain is very weak and the tone is very brittle, something you donīt really need in a MM amp. Any suggestions for a tube with a good and smooth overdrive tone with some gain and low noise ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Mike (mike_h)
Username: mike_h

Registered: 06-2006
Posted on Wednesday, August 29, 2007 - 10:30 am:   

I've found that on a stock RD 50, I like to reduce the gain to get the sound I like. I really like a 5751 (gain 70) in place of a 12AX7 (gain 100). I've also tried the following:

12AT7 (gain 60)- Not bad, but not quite enough gain.
12AU7 (gain 20)- Great sound, not enough gain
12DW7 (gain 20/100)- I like this a lot, 2nd to a 5751.

I've never used TAD tubes, but I have found few Chinese tubes that I like. I've used Ruby tubes, and I've never cared for them. I prefer Sylvania, phillips, RCA, GE, and JJ (depending on the tube type) for the preamp tube. I use Winged SED 6L6 for the power tubes.

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration