| Author | Message | ||
     Jim Wainwright (av8or3) Username: av8or3 Registered: 10-2007 |
What are the recommended impedence settings for the stock speakers in the following combo's ? 410-sixty five 410HD-one thirty 210-sixty five 210HD-one thirty I have always thought that the 8 ohm selection was correct, but have gotten confused reading some of the posts in this section. Appreciate the advice, thanks Jim | ||
| Cameron Kinsey (gibson175) Username: gibson175 Registered: 09-2007 |
apparently the 210 sixty-five should run at 4 ohms. The 8 ohm setting is if you run another 4 ohm extension cabinet as the speaker outputs are wired in series. (or so my speaker repair guy said)hope this helps! |